Tank Connector LD Taiwan
Working Pressure | Materials |
---|---|
From 1/2″DN15 up to 4″DN100 150PSI@73°F PN10BAR@22°C | Body: PE+Fiber Glass Gasket: THERMOPLASTIC |
Standards | |
Thread: NPT, NPS, BSPT, BSP all are the standards of Tank Connector LD Taiwan |
Double nuts design for heavy duty application.
Installation information
- Please make sure the tank wall hole equal to the connector or up to 1/32″ larger than the nominal body. If exceeding the size, the O-ring may not be sealed properly.
- Make sure the O-ring sealing surface is smooth with no deep scratches or burrs.
- When tightening nut, the O-ring seal should be in contact with the tank wall.
- Hand-tighten only, over strengthen may cause damage to the product.
- Approximate tighten units is as follows:
NOMINAL PIPE SIZE TIGHTEN UNIT 1/2″ 2/3 of a turn 3/4″ ~ 2-1/2″ 1/2 of a turn 3″ ~ 4″ 1/3 of a turn
Reviews
There are no reviews yet.